Audison ask

Discover the “bit Ten”, a versatile 5-channel DSP from Audison. This sophisticated multi-function processor features an analog input that allows you to transform a standard OEM or aftermarket system into a high-performance system. Reinforced by a 32-bit DSP with 147 MHz clock frequency and 24-bit A/D and D/A converters, the bit Ten offers an impressive range of technology. The processor offers four input and five output channels, all of which can be managed via the PC, and the proven USS technology enables seamless integration with head units. With the bit Ten you can take the audio playback in your vehicle to a new level.
TECHNICAL DATA
Nominal voltage of power supply / fuse 11 – 15 VDC
channels 5
Sample Rate 24 bit / 48 kHz
high-level inputs 4
low-level inputs 4
Digital Inputs 0
DSP calculation Fixed point
no-load current 0.4 A
Off without DRC MP 2.5 mA
Off with DRC MP 4 mA
Remote IN 7 ÷ 15 VDC (1.3 mA)
Remote OUT 12 VDC (130 mA)
SIGNAL LEVEL
Distortion – THD @ 1 kHz, 1 VRMS output 0.005 %
Bandwidth @ -3 dB 10 – 22k Hz
S/N ratio @ A weighted, 4 V output, 2 V MASTER input 96 dBA
S/N ratio @ A weighted, 4 V output, OPTICAL IN1/IN2 input 95 dBA
Channel separation at 1 kHz 85 dB
Input sensitivity AUX 0.6 – 5 V RMS
Input impedance Pre In 15 kΩ
Input impedance Speaker In / AUX 2.2 kΩ
Max. output voltage 0.1% THD 4 V RMS
INPUT LEVEL
Low level (Pre) AUX IN
High Level (Speaker In) FL – FR – RL – RR – PHONE IN
END STAGE
Low level (Pre) FRONT L/R, REAR L/R, SUB
CONNECTION
Connection to PC 1 x USB / B (1.1/2.0)
CROSSOVER
Filter type Full/High Pass/Low Pass/Band Pass
Filter mode and slope Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB
Crossover frequency 68 steps @ 20 -20k Hz
phase control 0° – 180°
TIME ORIENTATION
distance 0 – 510 cm
Delay 0 – 15 ms
steps 0.08 ms; 2.8 cm