View all
View all
Dayton Audio DTA-2.1BT2 Class D Bluetooth Amplifier
€149.95
The DTA-2.1BT2 amplifier provides clean Class-D power from an extremely compact and lightweight design. It is able to adequately power most speakers, and is also able to power a passive subwoofer. This allows you to create an inexpensive and high-performance 2.1 set up for any office, bedroom, or small home theater.
30 in stock
Highlights of the Dayton Audio DTA-2.1BT2
- Perfect to power an entire 2.1 system
- User selectable sub crossover frequency knob
- High-quality binding posts to ensure a solid connection and a professional look
- Volume, tone, and sub level control via the front panel for easy attenuation
- Bluetooth, RCA, and 3.5 mm inputs for a wide selection of inputs
Product details of the Dayton Audio DTA-2.1BT2
Dayton Audio DTA-2.1BT2 100W 2.1 Class D Bluetooth Amplifier with Sub Frequency Adjustment
The DTA-2.1BT2 is a discrete whole system amplifier that provides output for 2 speakers and a passive subwoofer. This design allows you to create a compact 2.1 setup for virtually any room whether it be an office, bedroom, or even a small home theater. The 2 x 50W output power is more than enough for most bookshelf speakers, and the subwoofer output of 100W is ideal for a small subwoofer or bass shaker.
Specifications
| Article number | DTA-2.1BT2 |
| EAN | 0848791004575 |
| Rated power output (RMS) | 2 x 50 Watts at 4 ohms + 1 x 100 Watts at 4 ohms |
| Bridged power output (RMS) | – |
| Minimum load | 4 ohm |
| Signal-to-noise ratio (SNR) | 86 dB |
| Distortion | 0.06% |
| Distortion bridged | – |
| Efficiency | – |
| Frequency response | 20 – 20,000 Hz |
| Input impedance | – |
| Input sensitivity | – |
| Auto turn-on sensitivity | – |
| DSP | – |
| DAC | – |
| Maximum sampling rate | – |
| Circuit Topology | TPA3116 |
| Amplifier classification | Class D |
| Speaker output channels | 2 |
| Subwoofer output channel | 1 |
| Analog in/out | -/- |
| Optical S/PDIF in/out | -/- |
| Coaxial in/out | -/- |
| RCA in/out | 1/- |
| AUX in/out | 1/- |
| Bus in/out | -/- |
| XLR in/out | -/- |
| USB | – |
| Memory card slot | – |
| Network connection | – |
| Headphone jack | – |
| Subwoofer pre-out | – |
| Bluetooth | 4.0 |
| NFC | – |
| Wi-Fi | – |
| Banana plug compatible | check |
| Remote control | – |
| App control | – |
| Auto turn-on | – |
| Accepted file formats | – |
| Equalizer (EQ) adjustment | check |
| Equalizer (EQ) profiles | – |
| Multi zone/room | – |
| Crossover frequency adjustment | 50-120 Hz |
| Bridge mode | – |
| Power requirements | 24 VDC |
| Power inlet connector | – |
| Power consumption | – |
| Stand-by power consumption | – |
| Dimensions (D x W x H) | 152 x 130 x 38 mm |
| Case material | Aluminum |
| plus | 2 x 50 Watts at 4 ohms |
| min | No remote control unit |
| Article number | DTA-2.1BT2 |
| EAN | 0848791004575 |
| Rated power output (RMS) | 2 x 50 Watts at 4 ohms + 1 x 100 Watts at 4 ohms |
|---|---|
| Minimum load | 4 ohm |
| Signal-to-noise ratio (SNR) | 86 dB |
| Distortion | 0.06% |
| Frequency response | 20 – 20,000 Hz |
| Circuit Topology | TPA3116 |
| Amplifier classification | Class-D |
| Speaker output channels | 2 |
| Subwoofer output channel | 1 |
| Analog in/out | -/- |
| Optical S/PDIF in/out | -/- |
| Coaxial in/out | -/- |
| RCA in/out | 1/- |
| AUX in/out | 1/- |
| Bus in/out | -/- |
| XLR in/out | -/- |
| Bluetooth | 4.0 |
| Banana plug compatible | check |
| Equalizer (EQ) adjustment | check |
| Crossover frequency adjustment | 50-120 Hz |
| Power Requirements | 24 VDC |
| Dimensions (D x W x H) | 152 x 130 x 38 mm |
| Case material | Aluminum |
| Specification | Bluetooth |
