View all
View all
SB Acoustics SB36WBAC21-4 1” Aluminum Wide-band Driver 4 Ohm
SB Acoustics SB36WBAC21-4 1” Aluminum Wide-band Driver 4 Ohm
- Impedance (Z)
- 4 ohms
- Power Handling (RMS)
- 5 Watts
- Power Handling (max)
- --
€17.25
6 in stock
Delivery options and total cost confirmed at checkout.
View full specifications
Not sure it fits your setup?
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility advice
Description
Highlights
- Long-stroke low damping surround
- Vented low compression design
- Resonance and break-up control
- Cable Prepared for rear mounting
- Long-life silver lead wires
Product details
The Wide-band 4 ohm driver combines a near-flat frequency curve with a good off-axis response. Making it an ideal product for applications like micro speakers, car audio, or other applications where space is at a premium. It is recommended that u use this driver with a second-order 12dB/oct high-pass filter set at 200hz to protect the driver.
Specifications
| Article number | SB36WBAC21-4 |
| EAN | 8785256841974 |
| Woofer Type | Full-range |
| Nominal Diameter | 1" |
| Power Handling (RMS) | 5 Watts |
| Power Handling (max) | — |
| Continuous Program Power | — |
| Impedance (Z) | 4 Ohms |
| Sensitivity (SPL at 1m / 2.83V) | 77 dB |
| Frequency Response | — |
| Voice Coil Diameter | 20.4 mm |
| Magnet Weight | 0.01 kg |
| DC Resistance (Re) | 3.4 Ohms |
| Voice Coil Inductance (Le) | 0.12 mH |
| Resonant Frequency (Fs) | 200 Hz |
| Mechanical Q (Qms) | 0.68 |
| Electromagnetic Q (Qes) | 1.05 |
| Total Q (Qts) | 0.41 |
| Diaphragm Mass Inc. Airload (Mms) | 0.76 |
| Moving Mass Of Diaphragm (Mmd) | — |
| Mechanical Compliance of Suspension (Cms) | 0.83 mm/N |
| Surface Area of Cone (Sd) | 4.2 cm2 |
| Volume of Displacement (Vd) | — |
| BL Product (BL) | 1.76 N/A |
| Compliance Equivalent Volume (Vas) | 0.021 Liter |
| Maximum Linear Excursion (Xmax) | 1.75 mm |
| Driver's Mechanical Losses (Rms) | 1.4Kg/s |
| Cone / Diaphragm Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | — |
| Voice Coil Former | — |
| Dual Voice Coil | No |
| Magnet Material | Neodynium |
| Shielded | No |
| Baffle Cutout Diameter | 36MM |
| Article number | SB36WBAC21-4 |
| EAN | 8785256841974 |
Additional information
| Woofer Type | Full-Range |
|---|---|
| Nominal Diameter | 1″ |
| Power Handling (RMS) | 5 Watts |
| Power Handling (max) | — |
| Continuous Program Power | — |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 77 dB |
| Frequency response | — |
| Voice Coil Diameter | 20.4 mm |
| Magnet Weight | 0.01 kg |
| DC Resistance (Re) | 3.4 ohms |
| Voice Coil Inductance (Le) | 0.12 mH |
| Resonant Frequency (Fs) | 200 Hz |
| Mechanical Q (Qms) | 0.68 |
| Electromagnetic Q (Qes) | 1.05 |
| Total Q (Qts) | 0.41 |
| Diaphragm Mass Inc. Airload (Mms) | 0.76 |
| Moving Mass Of Diaphragm (Mmd) | — |
| Mechanical Compliance of Suspension (Cms) | 0.83 mm/N |
| Surface Area of Cone (Sd) | 4.2 cm2 |
| Volume of Displacement (Vd) | — |
| BL Product (BL) | 1.76 N/A |
| Compliance Equivalent Volume (Vas) | 0.021 Liter |
| Maximum Linear Excursion (Xmax) | 1.75 mm |
| Driver's Mechanical Losses (Rms) | 1.4Kg/s |
| Cone / Diaphragm Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | — |
| Voice Coil Former | — |
| Dual Voice Coil | No |
| Magnet Material | Neodynium |
| Shielded | No |
| Baffle Cutout Diameter | 36MM |
Shipping & Delivery
USPS Fast Shipping
Explore AudioStatus
Alternatives
Compare other options from the same product category.
Explore AudioStatus
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
