Dayton Audio ND90-8 3-1/2″ Aluminum Cone Full-Range Driver 8 Ohm

Looking for a small driver that punches above its weight class? This radical high performance full-range transducer exudes an aura of superiority.

Impedance (Z)
8 ohms
Power Handling (RMS)
20 Watts
Power Handling (max)
40 Watts

€41.45

Available on backorder

Delivery options and total cost confirmed at checkout.

View full specifications
Not sure it fits your setup?

Ask us to check connections, dimensions and compatibility before you order.

Get compatibility advice
SKU: ND90-8 Categories: , ,
Description

Highlights

  • Direct replacement for Aura NS3
  • Rubber-edged anodized aluminum alloy cone
  • Large excursion capability—4 mm Xmax, 20 mm peak
  • Self-shielded Neo-Balanced motor structure
  • Full-range 80 Hz to 15 kHz performance
  • 3/4″ 4-layer underhung voice coil with polyimide former
  • 20 watts RMS power handling

 

Product details

Dayton Audio ND90-8 3-1/2″ Aluminum Cone Full-Range Driver 8 Ohm

 

Dayton Audio’s compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.

Specifications

Article number ND90-8
EAN 0844632077449
Woofer Series Dayton Audio ND series
Woofer Type Full-Range
Nominal Diameter 3.50"
Power Handling (RMS) 20 Watts
Power Handling (max) 40 watts
Impedance (Z) 8 ohms
Sensitivity (SPL at 1m / 2.83V) 81.4 dB
Frequency Response 80 – 15,000 Hz
Voice Coil Diameter 19 mm
DC Resistance (Re) 7.5 ohms
Voice Coil Inductance (Le) 1.08 mH @ 1 kHz
Resonant Frequency (Fs) 70.7 Hz
Mechanical Q (Qms) 4.71
Electromagnetic Q (Qes) 0.75
Total Q (Qts) 0.65
Diaphragm Mass Inc. Airload (Mms) 4.2g
Mechanical Compliance of Suspension (Cms) 1.22 mm/N
Surface Area of Cone (Sd) 31.2 cm²
Volume of Displacement (Vd) 12.5 cm³
BL Product (BL) 4.3 Tm
Compliance Equivalent Volume (Vas) 1.77 liters
Maximum Linear Excursion (Xmax) 4 mm
Cone / Diaphragm Material Black Anodized Aluminum Cone
Surround Material Rubber
Voice Coil Wire Material Copper
Voice Coil Former Kapton® / Polyimide
Basket / Frame Material Steel
Magnet Material Neodymium
Shielded Yes
Overall Outside Diameter 103.5 mm
Overall Depth 60.8 mm
Baffle Cutout Diameter 85 mm
# Mounting Holes 4
Sealed Volume 0.1 ft.³
Sealed F3 96 Hz
Vented Volume 0.15 ft.³
Vented F3 50 Hz
Article number ND90-8
EAN 0844632077449
Additional information
Woofer SeriesDayton Audio ND series
Woofer TypeFull-Range
Nominal Diameter3.50″
Power Handling (RMS)20 Watts
Power Handling (max)40 Watts
Impedance (Z)8 ohms
Sensitivity (SPL at 1m / 2.83V)81.4 dB
Frequency response80 – 15,000 Hz
Voice Coil Diameter19 mm
DC Resistance (Re)7.5 ohms
Voice Coil Inductance (Le)1.08 mH @ 1 kHz
Resonant Frequency (Fs)70.7 Hz
Mechanical Q (Qms)4.71
Electromagnetic Q (Qes)0.75
Total Q (Qts)0.65
Diaphragm Mass Inc. Airload (Mms)4.2g
Mechanical Compliance of Suspension (Cms)1.22 mm/N
Surface Area of Cone (Sd)31.2 cm²
Volume of Displacement (Vd)12.5 cm³
BL Product (BL)4.3 Tm
Compliance Equivalent Volume (Vas)1.77 liters
Maximum Linear Excursion (Xmax)4 mm
Cone / Diaphragm MaterialBlack Anodized Aluminum Cone
Surround MaterialRubber
Voice Coil Wire MaterialCopper
Voice Coil FormerKapton® / Polyimide
Basket / Frame MaterialSteel
Magnet MaterialNeodymium
ShieldedYes
Overall Outside Diameter103.5 mm
Overall Depth60.8 mm
Baffle Cutout Diameter85 mm
# Mounting Holes4
Sealed Volume0.1 ft.³
Sealed F396 Hz
Vented Volume0.15 ft.³
Vented F350 Hz
Shipping & Delivery
USPS Fast Shipping