View all
View all
SB Acoustics SW26DBAC76-8 Subwoofer
SB Acoustics SW26DBAC76-8 10’’Aluminum Cone Shallow Subwoofer
- Impedance (Z)
- 8 ohms
- Power Handling (RMS)
- 250 Watts
- Resonant Frequency (Fs)
- 19.5 Hz
€299.95
3 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Unique patented long through shallow design
- Powerful neodymium motor system
- Vented cast aluminum cone structure
- Non conducting fiber glass coil former for minimum damping
- Shorting ring in motor system for reduced distortion
- Long life silver lead wires
Product details
The SB Acoustics SW26DBAC76-8 Aluminum 10 inch 8 ohm shallow Subwoofer can give great low-end extension in a shallow enclosures due to its unique long trough design. With a depth of only 70.5 mm its good for applications where clearance can become an issue. A sealed enclosure with a volume of 9.7Ltr is recommend for optimal performance. This driver is not recommended for a bass-reflex/ported enclosures.
Specifications
| Article number | SW26DBAC76-8 |
| EAN | 8785256842032 |
| Woofer Type | Subwoofer |
| Nominal Diameter | 10'' |
| Power Handling (RMS) | 250 Watts |
| Impedance (Z) | 8 Ohms |
| Sensitivity (SPL at 1m / 2.83V) | 83 dB |
| Voice Coil Diameter | 75.5 mm |
| Magnet Weight | 281 g |
| DC Resistance (Re) | 6.4 Ohms |
| Voice Coil Inductance (Le) | 4.37 mH |
| Resonant Frequency (Fs) | 19.5 Hz |
| Mechanical Q (Qms) | 4.4 |
| Electromagnetic Q (Qes) | 0.29 |
| Total Q (Qts) | 0.28 |
| Diaphragm Mass Inc. Airload (Mms) | 172 g |
| Mechanical Compliance of Suspension (Cms) | 0.39 mm/N |
| Surface Area of Cone (Sd) | 312 cm2 |
| BL Product (BL) | 21.4 Tm |
| Compliance Equivalent Volume (Vas) | 54 Liters |
| Maximum Linear Excursion (Xmax) | 12 mm |
| Driver's Mechanical Losses (Rms) | 4.8 kg/s |
| Cone / Diaphragm Material | Aluminum |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Glass Fiber |
| Basket / Frame Material | Aluminum |
| Magnet Material | Neodynium |
| Overall Outside Diameter | 290 mm |
| Overall Depth | 84.6 mm |
| Bolt Circle Diameter | 5.5 mm |
| # Mounting Holes | 8 |
| Mounting Hole Diameter | 249 mm |
| Article number | SW26DBAC76-8 |
| EAN | 8785256842032 |
| Woofer Type | Subwoofer |
|---|---|
| Nominal Diameter | 10” |
| Power Handling (RMS) | 250 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 83 dB |
| Voice Coil Diameter | 75.5 mm |
| Magnet Weight | 281 g |
| DC Resistance (Re) | 6.4 ohms |
| Voice Coil Inductance (Le) | 4.37 mH |
| Resonant Frequency (Fs) | 19.5 Hz |
| Mechanical Q (Qms) | 4.4 |
| Electromagnetic Q (Qes) | 0.29 |
| Total Q (Qts) | 0.28 |
| Diaphragm Mass Inc. Airload (Mms) | 172 g |
| Mechanical Compliance of Suspension (Cms) | 0.39 mm/N |
| Surface Area of Cone (Sd) | 312 cm2 |
| BL Product (BL) | 21.4 Tm |
| Compliance Equivalent Volume (Vas) | 54 liters |
| Maximum Linear Excursion (Xmax) | 12 mm |
| Driver's Mechanical Losses (Rms) | 4.8 kg/s |
| Cone / Diaphragm Material | Aluminum |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Glass Fiber |
| Basket / Frame Material | Aluminum |
| Magnet Material | Neodynium |
| Overall Outside Diameter | 290 mm |
| Overall Depth | 84.6 mm |
| Bolt Circle Diameter | 5.5 mm |
| # Mounting Holes | 8 |
| Mounting Hole Diameter | 249 mm |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
