View all
View all
Dayton Audio AN25F-4 Dome Tweeter Matched Pair
The Automotive Neodymium Series tweeter pairs by Dayton Audio offer remarkable clarity, good off-axis dispersion, and an exceptionally flat response above 3 kHz. These tweeters are specifically designed for car audio systems, however their modern appearance and flat response curve integrate easily into any design, especially where minimal center-to-center spacing of the tweeter and woofer placement is needed.
- Impedance (Z)
- 4 Ω
- Power Handling (RMS)
- 30 Watts
- Frequency response
- 3,000 - 20,000 Hz
€54.95
1 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Ultra-high sensitivity 96dB from 3 kHz to 20 kHz
- Exceptionally flat treble response for accurate high frequency reproduction
- High-strength neodymium motor provides low distortion
- 1″ silk diaphragm for remarkable clarity and great off-axis response
- 1″ diameter voice coil for excellent power handling
- All hardware included to permit flush or surface mounting
Product details
Dayton Audio AN25F-4 1″ Soft Dome Neodymium Car Audio Tweeter Pair 4 Ohm
Dayton Audio designed the AN25F-4 tweeter to provide superb audio reproduction. The silk diaphragm offers remarkable clarity, great off-axis dispersion and an exceptionally flat response above 3 kHz. Although these tweeters where specifically designed for car audio systems, their modern appearance, high efficiency, and flat response curve integrate easily into many non-automotive designs and are especially useful in MTM and TMM designs where high efficiency and/or minimal center-to-center spacing of the tweeter and woofer placement is needed. Sold in pairs.
Specifications
| Article number | AN25F-4 |
| EAN | 0848791004698 |
| Tweeter Type | Soft Dome |
| Tweeter Series | Automotive Neodymium Series |
| Cone / Dome Diameter | 25 mm | 1" |
| Power Handling (RMS) | 30 Watts |
| Impedance (Z) | 4 Ω |
| Sensitivity (SPL at 1m / 2.83V) | 96.5 dB |
| Frequency Response | 3,000 – 20,000 Hz |
| Resonant Frequency (Fs) | 1619 Hz |
| DC Resistance (Re) | 3.04 ohms |
| Voice Coil Inductance (Le) | 0.03 mH |
| Mechanical Q (Qms) | 3.77 |
| Electromagnetic Q (Qes) | 1.91 |
| Total Q (Qts) | 1.27 |
| Overall Outside Diameter | 2.9'' |
| Cutout Diameter | 1.7'' |
| Depth | 0.75" |
| Article number | AN25F-4 |
| EAN | 0848791004698 |
| Tweeter Type | Soft Dome |
|---|---|
| Tweeter Series | Automotive Neodymium Series |
| Cone / Dome Diameter | 25 mm | 1″ |
| Power Handling (RMS) | 30 Watts |
| Impedance (Z) | 4 Ω |
| Sensitivity (SPL at 1m / 2.83V) | 96.5 dB |
| Frequency response | 3,000 – 20,000 Hz |
| Resonant Frequency (Fs) | 1619 Hz |
| DC Resistance (Re) | 3.04 ohms |
| Voice Coil Inductance (Le) | 0.03 mH |
| Mechanical Q (Qms) | 3.77 |
| Electromagnetic Q (Qes) | 1.91 |
| Total Q (Qts) | 1.27 |
| Overall Outside Diameter | 2.9” |
| Cutout Diameter | 1.7” |
| Depth | 0.75″ |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
