View all
View all
Dayton Audio AN25Ti-4 Dome Tweeter Matched Pair
The Automotive Neodymium Series tweeter pairs by Dayton Audio offer remarkable clarity, good off-axis dispersion, and an exceptionally flat response above 3 kHz. These tweeters are specifically designed for car audio systems, however their modern appearance and flat response curve integrate easily into any design, especially where minimal center-to-center spacing of the tweeter and woofer placement is needed.
- Impedance (Z)
- 4Ω
- Power Handling (RMS)
- 40 Watts
- Power Handling (max)
- 80 Watts
€59.95
3 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Exceptionally flat treble response for accurate high frequency reproduction
- High-strength neodymium motor provides low distortion and compact size
- Ultra-high sensitivity of 95 dB to deliver high output with modest power
- 1″ titanium diaphragm for incredibly accuracy and great off-axis response
- 1″ diameter voice coil for excellent power handling
- All hardware included to permit flush or surface mounting
Product details
AN25Ti-4 1″ Titanium Dome Neodymium Car Audio Tweeter Pair 4 Ohm
Dayton Audio designed the AN25Ti-4 tweeter to provide superb audio reproduction. The titanium diaphragm offers remarkable accuracy, great off-axis dispersion and an exceptionally flat response above 3 kHz. Although these tweeters were specifically designed for car audio systems, their modern appearance, high efficiency, and flat response curve integrate easily into many non-automotive designs and are especially useful in MTM and TMM designs where high efficiency and/or minimal center-to-center spacing of the tweeter and woofer placement is needed. Sold in pairs.
Specifications
| Article number | AN25Ti-4 |
| EAN | 0848791004865 |
| Tweeter Type | Metal Dome |
| Tweeter Series | Automotive Neodymium Series |
| Cone / Dome Diameter | 25 mm | 1" |
| Power Handling (RMS) | 40 Watts |
| Power Handling (max) | 80 watts |
| Impedance (Z) | 4Ω |
| Sensitivity (SPL at 1m / 2.83V) | 95.5 dB |
| Frequency Response | 3,000-20,000 Hz |
| Resonant Frequency (Fs) | 1744 Hz |
| DC Resistance (Re) | 3.11 ohms |
| Voice Coil Inductance (Le) | 0.03 mH |
| Mechanical Q (Qms) | 3.04 |
| Electromagnetic Q (Qes) | 2.28 |
| Total Q (Qts) | 1.30 |
| Overall Outside Diameter | 53 |
| Article number | AN25Ti-4 |
| EAN | 0848791004865 |
| Tweeter Type | Metal Dome |
|---|---|
| Tweeter Series | Automotive Neodymium Series |
| Cone / Dome Diameter | 25 mm | 1″ |
| Power Handling (RMS) | 40 Watts |
| Power Handling (max) | 80 Watts |
| Impedance (Z) | 4Ω |
| Sensitivity (SPL at 1m / 2.83V) | 95.5 dB |
| Frequency response | 3,000-20,000 Hz |
| Resonant Frequency (Fs) | 1744 Hz |
| DC Resistance (Re) | 3.11 ohms |
| Voice Coil Inductance (Le) | 0.03 mH |
| Mechanical Q (Qms) | 3.04 |
| Electromagnetic Q (Qes) | 2.28 |
| Total Q (Qts) | 1.30 |
| Overall Outside Diameter | 53 |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
