View all
View all
Dayton Audio LW150-4 6″ Low Profile Woofer 4 Ohms
The Dayton Audio LW150-4 6″ woofer’s unique venting allows zero-clearance installation in ultra-low profile applications. Solid bass output can be produced from spaces never thought possible.
- Impedance (Z)
- 4 ohms
- Power Handling (RMS)
- 40 Watts
- Power Handling (max)
- 80 Watts
€62.45
14 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Very low profile woofer fits in tight spots
- Flat woven glass-fiber/honeycomb aluminum composite cone
- Dual sandwiched spiders and S-shaped surround enhance linear travel capability
- Large 1-1/4″ 4-layer voice coil and optimized T-pole gap geometry
- Peripheral holes in spider landing enable zero-clearance venting in shallow enclosures
- Great for on-wall, in-wall, or car audio applications
Product details
Dayton Audio LW150-4 6″ Low Profile Woofer 4 Ohms
The unique and versatile Dayton Audio LW150-4 6″ woofer was designed for space limited, minimum depth applications. Its low-profile frame and unique venting permit the back of the woofer to be placed directly against cabinet walls or even embedded (countersunk) into the cabinet, resulting in an enclosure less than 1-1/2″ deep. Great match for today’s ultra-thin TVs or use as a down firing subwoofer in a low powered system, low-frequency down-firing driver in a center channel/monitor stand, or bookshelf stand.
Specifications
| Article number | LW150-4 |
| EAN | 0848791001864 |
| Woofer Series | Dayton Audio Low Profile series |
| Woofer Type | Subwoofer |
| Nominal Diameter | 6" |
| Power Handling (RMS) | 40 Watts |
| Power Handling (max) | 80 watts |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 86.1 dB |
| Frequency Response | 60 – 1,800 Hz |
| Voice Coil Diameter | 31.8 mm |
| DC Resistance (Re) | 3.6 ohms |
| Voice Coil Inductance (Le) | 0.86 mH @ 1 kHz |
| Resonant Frequency (Fs) | 62.6 Hz |
| Mechanical Q (Qms) | 6.01 |
| Electromagnetic Q (Qes) | 0.72 |
| Total Q (Qts) | 0.64 |
| Diaphragm Mass Inc. Airload (Mms) | 21.9g |
| Mechanical Compliance of Suspension (Cms) | 0.3 mm/N |
| Surface Area of Cone (Sd) | 91.6 cm² |
| Volume of Displacement (Vd) | 36.6 cm³ |
| BL Product (BL) | 6.52 Tm |
| Compliance Equivalent Volume (Vas) | 3.49 liters |
| Maximum Linear Excursion (Xmax) | 4 mm |
| Overall Outside Diameter | 6" |
| Overall Depth | 1-3/8" |
| Baffle Cutout Diameter | 5-1/8" |
| Sealed Volume | 0.24 ft.³ |
| Sealed F3 | 77 Hz |
| Vented Volume | 0.33 ft.³ |
| Vented F3 | 40 Hz |
| Article number | LW150-4 |
| EAN | 0848791001864 |
| Woofer Series | Dayton Audio Low Profile series |
|---|---|
| Woofer Type | Subwoofer |
| Nominal Diameter | 6″ |
| Power Handling (RMS) | 40 Watts |
| Power Handling (max) | 80 Watts |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 86.1 dB |
| Frequency response | 60 – 1,800 Hz |
| Voice Coil Diameter | 31.8 mm |
| DC Resistance (Re) | 3.6 ohms |
| Voice Coil Inductance (Le) | 0.86 mH @ 1 kHz |
| Resonant Frequency (Fs) | 62.6 Hz |
| Mechanical Q (Qms) | 6.01 |
| Electromagnetic Q (Qes) | 0.72 |
| Total Q (Qts) | 0.64 |
| Diaphragm Mass Inc. Airload (Mms) | 21.9g |
| Mechanical Compliance of Suspension (Cms) | 0.3 mm/N |
| Surface Area of Cone (Sd) | 91.6 cm² |
| Volume of Displacement (Vd) | 36.6 cm³ |
| BL Product (BL) | 6.52 Tm |
| Compliance Equivalent Volume (Vas) | 3.49 liters |
| Maximum Linear Excursion (Xmax) | 4 mm |
| Overall Outside Diameter | 6″ |
| Overall Depth | 1-3/8″ |
| Baffle Cutout Diameter | 5-1/8″ |
| Sealed Volume | 0.24 ft.³ |
| Sealed F3 | 77 Hz |
| Vented Volume | 0.33 ft.³ |
| Vented F3 | 40 Hz |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
