View all
View all
GRS 8SW-4HE-8 Paper Cone Rubber Surround High-Excursion Subwoofer 4 Ohm
The versatile 8SW-4HE 8” high excursion subwoofer from GRS is designed to produce excellent low frequency extension in a variety of designs. Suitable for both sealed and vented enclosures, this driver the ideal replacement or upgrade for your existing subwoofers with worn out or blown drivers. Featuring extensive venting, rubber surround, high temperature voice coil, low Fs, and 10.5 mm of excursion the 8SW-4HE is built for remarkable bass response on a budget.
- Impedance (Z)
- 4 Ω
- Power Handling (RMS)
- 150 Watts
- Power Handling (max)
- 300 Watts
€84.95
165 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- High excursion and low Fs to produce powerful low frequency output
- 2” voice coil on a thick aluminum former to handle up to 150 watts RMS
- Venting under the spider, through the pole piece, and in the magnetic gap for excellent heat dissipation
- Durable reinforced paper cone with rubber surround produces reliable and consistent performance
- Extended frame and bumped back plate allow ample clearance for high excursion
Product details
The GRS 8SW-4HE 8” high excursion subwoofer from GRS is an ideal replacement driver for existing subwoofer systems or an excellent choice for new economical designs. Capable of producing powerful bass response in both sealed and vented designs, the 8SW-4HE is suitable as a drop-in replacement for most existing 8” subwoofers.
Key Specs:
- Nominal Diameter: 8″
- Power Handling (RMS): 150W
- Power Handling (MAX): 300W
- Impedance: 4 Ω
- Frequency Response: 30-700Hz
- Sensitivity: 85dB 2.83V/1m
- Voice Coil Diameter: 2″
- Maximum Linear Excursion: 10.8mm
Frequency Response & Impedance Curve
the GRS 8SW-4HE has a bass-centric response from 30Hz up to 700Hz and is highly efficient within its passband. This efficiency and a low QTS lends itself well to both vented and sealed subwoofers for incredibly deep bass from an 8-inch driver.
Extensive venting through the frame, pole piece, and magnetic gap dissipates excess heat to keep power compression to a minimum, even when driven hard for long periods. The rigid paper cone is supported by a large diameter spider and rubber surround to keep excursion linear while providing reliable performance. With a high temperature 2” voice coil wound on a thick aluminum former the 8SW-4HE can comfortably handle up to 150 watts RMS of power.
Specifications
| Article number | 8SW-4HE-8 |
| EAN | 0848864070469 |
| Woofer Type | Subwoofer |
| Nominal Diameter | 8" |
| Power Handling (RMS) | 150 Watts |
| Power Handling (max) | 300 Watts |
| Impedance (Z) | 4 Ω |
| Sensitivity (SPL at 1m / 2.83V) | 85 dB |
| Frequency Response | 30 to 700HzHz |
| Voice Coil Diameter | 2" |
| Magnet Weight | 1,6 Kg |
| DC Resistance (Re) | 3.8 Ω |
| Voice Coil Inductance (Le) | 2.7mH |
| Resonant Frequency (Fs) | 24.9 Hz |
| Mechanical Q (Qms) | 4.42 |
| Electromagnetic Q (Qes) | 0.51 |
| Total Q (Qts) | 0.45 |
| Diaphragm Mass Inc. Airload (Mms) | 93.7g |
| Mechanical Compliance of Suspension (Cms) | 0.44 mm/N |
| Surface Area of Cone (Sd) | 227cm² |
| BL Product (BL) | 10.5 T·m |
| Compliance Equivalent Volume (Vas) | 1.12 ft³ |
| Maximum Linear Excursion (Xmax) | 10.8 mm |
| Cone / Diaphragm Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 209 mm |
| Overall Depth | 128 mm |
| Baffle Cutout Diameter | 181 mm |
| Bolt Circle Diameter | 198 mm |
| # Mounting Holes | 8 |
| Mounting Hole Diameter | 5.2 mm |
| Sealed Volume | 0.5ft³ |
| Sealed F3 | 46Hz |
| Vented Volume | 1ft³ |
| Vented F3 | 27Hz |
| plus | This speaker produces excellent low frequency |
| Article number | 8SW-4HE-8 |
| EAN | 0848864070469 |
| Woofer Type | Subwoofer |
|---|---|
| Nominal Diameter | 8″ |
| Power Handling (RMS) | 150 Watts |
| Power Handling (max) | 300 Watts |
| Impedance (Z) | 4 Ω |
| Sensitivity (SPL at 1m / 2.83V) | 85 dB |
| Frequency response | 30 to 700HzHz |
| Voice Coil Diameter | 2″ |
| Magnet Weight | 1,6 Kg |
| DC Resistance (Re) | 3.8 Ω |
| Voice Coil Inductance (Le) | 2.7mH |
| Resonant Frequency (Fs) | 24.9 Hz |
| Mechanical Q (Qms) | 4.42 |
| Electromagnetic Q (Qes) | 0.51 |
| Total Q (Qts) | 0.45 |
| Diaphragm Mass Inc. Airload (Mms) | 93.7g |
| Mechanical Compliance of Suspension (Cms) | 0.44 mm/N |
| Surface Area of Cone (Sd) | 227cm² |
| BL Product (BL) | 10.5 T·m |
| Compliance Equivalent Volume (Vas) | 1.12 ft³ |
| Maximum Linear Excursion (Xmax) | 10.8 mm |
| Cone / Diaphragm Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 209 mm |
| Overall Depth | 128 mm |
| Baffle Cutout Diameter | 181 mm |
| Bolt Circle Diameter | 198 mm |
| # Mounting Holes | 8 |
| Mounting Hole Diameter | 5.2 mm |
| Sealed Volume | 0.5ft³ |
| Sealed F3 | 46Hz |
| Vented Volume | 1ft³ |
| Vented F3 | 27Hz |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
