View all
View all
GRS 10SW-4HE 10″ High Excursion Subwoofer 4 Ohm
€99.95
The versatile 10SW-4HE 10” high excursion subwoofer from GRS is designed to produce excellent low frequency extension in a variety of designs. Suitable for both sealed and vented enclosures, this driver the ideal replacement or upgrade for your existing subwoofers with worn out or blown drivers. Featuring extensive venting, rubber surround, high temperature voice coil, low Fs, and 10.5 mm of excursion the 10SW-4HE is built for remarkable bass response on a budget.
30 in stock
Highlights
- High excursion and low Fs to produce powerful low frequency output
- 2” voice coil on a thick aluminum former to handle up to 200 watts RMS
- Venting under the spider, through the pole piece, and in the magnetic gap for excellent heat dissipation
- Durable reinforced paper cone with rubber surround produces reliable and consistent performance
- Extended frame and bumped back plate allow ample clearance for high excursion
Product details
Key Specs:
- Nominal Diameter: 10″
- Power Handling (RMS): 200W
- Power Handling (MAX): 400W
- Impedance: 4 Ω
- Frequency Response: 26-500Hz
- Sensitivity: 87.5dB 2.83V/1m
- Voice Coil Diameter: 2″
- Maximum Linear Excursion: 11mm
Frequency Response & Impedance Curve
The GRS 10SW-4HE has a bass-centric response from 20Hz up to 800Hz and is highly efficient within its passband. This efficiency and a low QTS lends itself well to both vented and sealed subwoofers for incredibly deep bass from an 10-inch driver.
Extensive venting through the frame, pole piece, and magnetic gap dissipates excess heat to keep power compression to a minimum, even when driven hard for long periods. The rigid paper cone is supported by a large diameter spider and rubber surround to keep excursion linear while providing reliable performance. With a high temperature 2” voice coil wound on a thick aluminum former the 10SW-4HE can comfortably handle up to 200 watts RMS of power.
Specifications
| Article number | 10SW-4HE |
| EAN | 0848864070476 |
| Woofer Type | Subwoofer |
| Nominal Diameter | 10" |
| Power Handling (RMS) | 200 Watts |
| Power Handling (max) | 400 Watts |
| Impedance (Z) | 4Ω |
| Sensitivity (SPL at 1m / 2.83V) | 87.5 dB |
| Frequency Response | 26 to 500 Hz |
| Voice Coil Diameter | 2" |
| DC Resistance (Re) | 3.8Ω |
| Voice Coil Inductance (Le) | 3mH |
| Resonant Frequency (Fs) | 25 Hz |
| Mechanical Q (Qms) | 4 |
| Total Q (Qts) | 0.5 |
| Diaphragm Mass Inc. Airload (Mms) | 110.7g |
| Mechanical Compliance of Suspension (Cms) | 0.36mm/N |
| Surface Area of Cone (Sd) | 346.4cm² |
| BL Product (BL) | 10.8T·m |
| Compliance Equivalent Volume (Vas) | 2.14ft³ |
| Maximum Linear Excursion (Xmax) | 11 mm |
| Cone / Diaphragm Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 10.11" |
| Overall Depth | 5.15" |
| Baffle Cutout Diameter | 9.18" |
| Bolt Circle Diameter | 9.64 |
| # Mounting Holes | 8 |
| Sealed Volume | 1ft³ |
| Sealed F3 | 43Hz |
| Vented Volume | 2ft³ |
| Vented F3 | 25Hz |
| Article number | 10SW-4HE |
| EAN | 0848864070476 |
| Woofer Type | Subwoofer |
|---|---|
| Nominal Diameter | 10″ |
| Power Handling (RMS) | 200 Watts |
| Power Handling (max) | 400 Watts |
| Impedance (Z) | 4Ω |
| Sensitivity (SPL at 1m / 2.83V) | 87.5 dB |
| Frequency response | 26 to 500 Hz |
| Voice Coil Diameter | 2″ |
| DC Resistance (Re) | 3.8Ω |
| Voice Coil Inductance (Le) | 3mH |
| Resonant Frequency (Fs) | 25 Hz |
| Mechanical Q (Qms) | 4 |
| Total Q (Qts) | 0.5 |
| Diaphragm Mass Inc. Airload (Mms) | 110.7g |
| Mechanical Compliance of Suspension (Cms) | 0.36mm/N |
| Surface Area of Cone (Sd) | 346.4cm² |
| BL Product (BL) | 10.8T·m |
| Compliance Equivalent Volume (Vas) | 2.14ft³ |
| Maximum Linear Excursion (Xmax) | 11 mm |
| Cone / Diaphragm Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 10.11″ |
| Overall Depth | 5.15″ |
| Baffle Cutout Diameter | 9.18″ |
| Bolt Circle Diameter | 9.64 |
| # Mounting Holes | 8 |
| Sealed Volume | 1ft³ |
| Sealed F3 | 43Hz |
| Vented Volume | 2ft³ |
| Vented F3 | 25Hz |
