View all
View all
Visaton TIW 200 XS 8″ High-End Woofer 8 Ohm
€174.95
20 cm (8″) High-end woofer specially for use as a small subwoofer.
5 in stock
Highlights
- Rigid Sandwich diaphragm
- Wide surround
- Long voice coil
Product details
Visaton TIW 200 XS 8″ High-End Woofer
The extra-wide elastic surround, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion. Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast cone to vent the centering unit from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads. The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly rigid and low in resonance. These design features result in high level accuracy and excellent low-range bass imaging even in smaller cabinets.
Visaton article code: 1340
Specifications
| Article number | TIW 200 XS |
| EAN | 4007540013404 |
| Woofer Type | Midwoofer |
| Nominal Diameter | 222 mm |
| Power Handling (RMS) | 120 Watts |
| Power Handling (max) | 120 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 84 dB |
| Frequency Response | 30 – 7,500 Hz |
| Voice Coil Diameter | 38 mm |
| DC Resistance (Re) | 6 ohms |
| Voice Coil Inductance (Le) | 1.6 mH |
| Resonant Frequency (Fs) | 30 Hz |
| Mechanical Q (Qms) | 5.19 |
| Electromagnetic Q (Qes) | 0.5 |
| Total Q (Qts) | 0.46 |
| Diaphragm Mass Inc. Airload (Mms) | 33g |
| Mechanical Compliance of Suspension (Cms) | 0.856 mm/N |
| Surface Area of Cone (Sd) | 206 cm2 |
| BL Product (BL) | 8.51 Tm |
| Compliance Equivalent Volume (Vas) | 51.5 liters |
| Maximum Linear Excursion (Xmax) | 11 mm |
| Cone / Diaphragm Material | Fiberglass Polyester Sandwich |
| Voice Coil Former | Kapton |
| Basket / Frame Material | Cast Aluminum |
| Overall Outside Diameter | 222 mm |
| Overall Depth | 114 |
| Baffle Cutout Diameter | 190 mm |
| Bolt Circle Diameter | 210 mm |
| # Mounting Holes | 6 |
| Mounting Hole Diameter | 5 mm |
| Article number | TIW 200 XS |
| EAN | 4007540013404 |
| Woofer Type | Midwoofer |
|---|---|
| Nominal Diameter | 222 mm |
| Power Handling (RMS) | 120 Watts |
| Power Handling (max) | 120 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 84 dB |
| Frequency response | 30 – 7,500 Hz |
| Voice Coil Diameter | 38 mm |
| DC Resistance (Re) | 6 ohms |
| Voice Coil Inductance (Le) | 1.6 mH |
| Resonant Frequency (Fs) | 30 Hz |
| Mechanical Q (Qms) | 5.19 |
| Electromagnetic Q (Qes) | 0.5 |
| Total Q (Qts) | 0.46 |
| Diaphragm Mass Inc. Airload (Mms) | 33g |
| Mechanical Compliance of Suspension (Cms) | 0.856 mm/N |
| Surface Area of Cone (Sd) | 206 cm² |
| BL Product (BL) | 8.51 Tm |
| Compliance Equivalent Volume (Vas) | 51.5 liters |
| Maximum Linear Excursion (Xmax) | 11 mm |
| Cone / Diaphragm Material | Fiberglass Polyester Sandwich |
| Voice Coil Former | Kapton |
| Basket / Frame Material | Cast Aluminum |
| Overall Outside Diameter | 222 mm |
| Overall Depth | 114 |
| Baffle Cutout Diameter | 190 mm |
| Bolt Circle Diameter | 210 mm |
| # Mounting Holes | 6 |
| Mounting Hole Diameter | 5 mm |
