Mundorf H50-4,7 | 4,7 mH | 1,06 Ω | 3% | 24 AWG | MCoil Ferrite/Aronit DrumCore Coil

Highlights of the Mundorf H50-4,7

• 4.7 mH inductance with ±3% tolerance
• 1.06 Ohm DC resistance
• Ferrite/Aronit drum core construction
• OFC-Copper SolidCore conductor
• 0.20 mm² wire cross section, AWG 24, 0.50 mm

Product details Mundorf H50-4,7

Mundorf H50-4,7 4.7 mH MCoil Ferrite/Aronit DrumCore Coil 1.06 Ohm ±3% 24 AWG

The Mundorf H50-4,7 is designed for passive crossover components where a 4.7 mH inductor value is required. Its ±3% tolerance supports accurate crossover tuning, while the 1.06 Ohm DC resistance gives you a clear electrical specification for your design calculations.

This MCoil uses a ferrite/Aronit drum core, offering a compact coil format with a 26 mm diameter and 25 mm height. The taped winding fixation keeps the coil neatly secured, making it practical for installation on crossover boards or inside speaker cabinets.

The conductor is OFC-Copper SolidCore with a 0.20 mm² wire cross section, corresponding to AWG 24 and 0.50 mm wire diameter. Within the coils range, the H50 series is a straightforward choice when you need a space-saving drum core inductor with clearly defined electrical values.

The H50-4,7 uses coil body type F2625 and is supplied as a single piece. It is suitable for DIY speaker builders and crossover repairs where the specified inductance, resistance, tolerance, and compact physical dimensions match the project requirements.