View all
View all
SB Acoustics SB17NBAC35-4 6″ Black Aluminum Cone Woofer
SB Acoustics SB17NBAC35-4 6″ Black Aluminum Cone Woofer
- Impedance (Z)
- 4 ohms
- Power Handling (RMS)
- 60 Watts
- Resonant Frequency (Fs)
- 30 Hz
€84.95
4 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Vented cast aluminum chassis for optimum strength and low compression
- Geometrically reinforced aluminum cone for optimum piston operation and reduced break-up
- Soft low damping rubber surround for improved transient response
- Non-conducting fiber glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires
- Vented pole piece for reduced compression
Product details
The SB Acoustics SB17NBAC35-4 features a vented cast aluminum chassis for optimum strength and low compression, a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up. Soft low damping rubber surround for improved transient response and non-conducting fiber glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and low distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires and vented pole piece for reduced compression.
Specifications
| Article number | SB17NBAC35-4 |
| EAN | 0696277269457 |
| Woofer Series | SB Acoustics NAC Aluminum series |
| Woofer Type | Midwoofer |
| Nominal Diameter | 6" |
| Power Handling (RMS) | 60 Watts |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 90 dB |
| Voice Coil Diameter | 1.39" |
| DC Resistance (Re) | 3.1 ohms |
| Voice Coil Inductance (Le) | 0.13 mH |
| Resonant Frequency (Fs) | 30 Hz |
| Mechanical Q (Qms) | 4.3 |
| Electromagnetic Q (Qes) | 0.31 |
| Total Q (Qts) | 0.29 |
| Diaphragm Mass Inc. Airload (Mms) | 12.4 g |
| Mechanical Compliance of Suspension (Cms) | 2.16 mm/N |
| Surface Area of Cone (Sd) | 118 cm2 |
| BL Product (BL) | 4.9 Tm |
| Compliance Equivalent Volume (Vas) | 1.5 ft.³ |
| Maximum Linear Excursion (Xmax) | 5.5 mm |
| Article number | SB17NBAC35-4 |
| EAN | 0696277269457 |
| Woofer Series | SB Acoustics NAC Aluminum series |
|---|---|
| Woofer Type | Midwoofer |
| Nominal Diameter | 6″ |
| Power Handling (RMS) | 60 Watts |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 90 dB |
| Voice Coil Diameter | 1.39″ |
| DC Resistance (Re) | 3.1 ohms |
| Voice Coil Inductance (Le) | 0.13 mH |
| Resonant Frequency (Fs) | 30 Hz |
| Mechanical Q (Qms) | 4.3 |
| Electromagnetic Q (Qes) | 0.31 |
| Total Q (Qts) | 0.29 |
| Diaphragm Mass Inc. Airload (Mms) | 12.4 g |
| Mechanical Compliance of Suspension (Cms) | 2.16 mm/N |
| Surface Area of Cone (Sd) | 118 cm2 |
| BL Product (BL) | 4.9 Tm |
| Compliance Equivalent Volume (Vas) | 1.5 ft.³ |
| Maximum Linear Excursion (Xmax) | 5.5 mm |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
