Amplimo 2N465 Power Transformer Tube Amplifier 44 VA | Secundair 200V / 8V

Highlights of the Amplimo 2N465

• Toroidal power transformer for valve amplifiers
• Dual 115 V primaries for 115 V parallel or 230 V series operation
• Secondary outputs: 200 V at 100 mA, plus two 8 V windings at 1.5 A each
• Compact 82 mm diameter and 39 mm height
• Supplied with metal washer, neoprene washers, M5 mounting bolt and nut
• KEMA KEUR, ENEC, CE and UL/CSA approvals

Product details Amplimo 2N465

Amplimo 2N465 Power Transformer Tube Amplifier 44 VA toroidal transformer for valve amplifiers with 200 V and dual 8 V secondaries

The Amplimo 2N465 is designed as a toroidal power transformer for valve amplifier builds. Its two primary windings support both 115 V mains operation in parallel and 230 V mains operation in series, making it suitable for a range of mains configurations when wired correctly.

On the secondary side, the transformer provides a 200 V winding rated at 100 mA and two separate 8 V windings rated at 1.5 A each. All output voltages are specified under full ohmic load, with a regulation value of 12%, giving you clear electrical parameters for integrating it into tube amplifier audio components and related power supplies.

The compact toroidal construction measures 82 mm in diameter and 39 mm in height, with a transformer weight of 0.75 kg excluding mounting materials. Each solid lead is approximately 200 mm long, offering practical wiring length for chassis installation.

Mounting hardware is included: one 70 mm metal washer, two 70 mm neoprene washers, and an M5 x 50 bolt with nut. The 2N465 carries KEMA KEUR, ENEC, CE and UL/CSA approvals, with time-lag fuses required on the primary side and additional protection required for each secondary winding.