View all
View all
Dayton Audio DA115-8 4” Aluminum Cone Woofer
The aluminum cone on this driver is extremely rigid yet well damped, making the bass and midbass region very clean and low in distortion.
- Impedance (Z)
- 8 ohms
- Power Handling (RMS)
- 20 Watts
- Power Handling (max)
- 40 Watts
€29.95
18 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Great looking and sounding woofer
- Cosmetic stamped steel frame
- Flat frequency response in passband region
- Impressive output capabilities when used in MTM designs
- Very low distortion
Product details
Dayton Audio DA115-8 4″ Aluminum Cone Woofer
The aluminum cone on this driver is extremely rigid yet well damped, making the bass and midbass region very clean and low in distortion. When used with a well-designed crossover, an extremely flat frequency response can be achieved that is clean well into the midrange region.
Specifications
| Article number | DA115-8 |
| EAN | 0844632081675 |
| Woofer Series | Dayton Audio Specialty Drivers Series |
| Woofer Type | Midwoofer |
| Nominal Diameter | 4" |
| Power Handling (RMS) | 20 Watts |
| Power Handling (max) | 40 watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 84.9 dB |
| Frequency Response | 60 – 15,000 Hz |
| Voice Coil Diameter | 25 mm |
| DC Resistance (Re) | 6.4 ohms |
| Voice Coil Inductance (Le) | 0.70 mH |
| Resonant Frequency (Fs) | 60 Hz |
| Mechanical Q (Qms) | 2.60 |
| Electromagnetic Q (Qes) | 0.49 |
| Total Q (Qts) | 0.41 |
| Diaphragm Mass Inc. Airload (Mms) | 6.6g |
| Mechanical Compliance of Suspension (Cms) | 1.1 mm/N |
| Surface Area of Cone (Sd) | 53.1 cm² |
| Volume of Displacement (Vd) | 0.0133 cm³ |
| BL Product (BL) | 5.70 Tm |
| Compliance Equivalent Volume (Vas) | 4.4 liters |
| Maximum Linear Excursion (Xmax) | 2.5 mm |
| Cone / Diaphragm Material | Aluminum Cone |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 115.6 mm |
| Overall Depth | 57.3 mm |
| Baffle Cutout Diameter | 93 mm |
| # Mounting Holes | 4 |
| Sealed Volume | 0.04 ft.³ |
| Sealed F3 | 125 Hz |
| Vented Volume | 0.13 ft.³ |
| Vented F3 | 68 Hz |
| Article number | DA115-8 |
| EAN | 0844632081675 |
| Woofer Series | Dayton Audio Specialty Drivers Series |
|---|---|
| Woofer Type | Midwoofer |
| Nominal Diameter | 4″ |
| Power Handling (RMS) | 20 Watts |
| Power Handling (max) | 40 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 84.9 dB |
| Frequency response | 60 – 15,000 Hz |
| Voice Coil Diameter | 25 mm |
| DC Resistance (Re) | 6.4 ohms |
| Voice Coil Inductance (Le) | 0.70 mH |
| Resonant Frequency (Fs) | 60 Hz |
| Mechanical Q (Qms) | 2.60 |
| Electromagnetic Q (Qes) | 0.49 |
| Total Q (Qts) | 0.41 |
| Diaphragm Mass Inc. Airload (Mms) | 6.6g |
| Mechanical Compliance of Suspension (Cms) | 1.1 mm/N |
| Surface Area of Cone (Sd) | 53.1 cm² |
| Volume of Displacement (Vd) | 0.0133 cm³ |
| BL Product (BL) | 5.70 Tm |
| Compliance Equivalent Volume (Vas) | 4.4 liters |
| Maximum Linear Excursion (Xmax) | 2.5 mm |
| Cone / Diaphragm Material | Aluminum Cone |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 115.6 mm |
| Overall Depth | 57.3 mm |
| Baffle Cutout Diameter | 93 mm |
| # Mounting Holes | 4 |
| Sealed Volume | 0.04 ft.³ |
| Sealed F3 | 125 Hz |
| Vented Volume | 0.13 ft.³ |
| Vented F3 | 68 Hz |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
