View all
View all
Dayton Audio DA215-8 8″ Aluminum Cone Woofer
The aluminum cone on this driver is extremely rigid yet well damped, making the bass and midbass region very clean and low in distortion.
- Impedance (Z)
- 8 Ω
- Power Handling (RMS)
- 60 Watts
- Power Handling (max)
- 120 Watts
€64.95
16 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Great looking and sounding woofer
- One-piece aluminum cone
- Cosmetic stamped steel frame
- Flat frequency response in passband region
- Impressive output capabilities when used in MTM designs
- Very low distortion
Product details
Dayton Audio DA215-8 8″ Aluminum Cone Woofer
The aluminum cone on this driver is extremely rigid yet well damped, making the bass and midbass region very clean and low in distortion. When used with a well-designed crossover, an extremely flat frequency response can be achieved that is clean well into the midrange region.
Specifications
| Article number | DA215-8 |
| EAN | 0844632087691 |
| Woofer Series | Dayton Audio Specialty Drivers Series |
| Woofer Type | Midwoofer |
| Nominal Diameter | 8" |
| Power Handling (RMS) | 60 Watts |
| Power Handling (max) | 120 Watts |
| Impedance (Z) | 8 Ω |
| Sensitivity (SPL at 1m / 2.83V) | 88.7 dB |
| Frequency Response | 35 – 8.000 Hz |
| Voice Coil Diameter | 36 mm |
| Magnet Weight | 30 oz. |
| DC Resistance (Re) | 6.8 Ω |
| Voice Coil Inductance (Le) | 1.44 mH |
| Resonant Frequency (Fs) | 35 Hz |
| Mechanical Q (Qms) | 1.95 |
| Electromagnetic Q (Qes) | 0.45 |
| Total Q (Qts) | 0.37 |
| Diaphragm Mass Inc. Airload (Mms) | 30.3g |
| Mechanical Compliance of Suspension (Cms) | 0.68 mm/N |
| Surface Area of Cone (Sd) | 211.2 cm² |
| Volume of Displacement (Vd) | 112.0 cm³ |
| BL Product (BL) | 10.00 Tm |
| Compliance Equivalent Volume (Vas) | 42.7 liters |
| Maximum Linear Excursion (Xmax) | 5.3 mm |
| Cone / Diaphragm Material | Aluminum Cone |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 216 mm |
| Overall Depth | 94.5 mm |
| Baffle Cutout Diameter | 180 mm |
| # Mounting Holes | 5 |
| Sealed Volume | 0.32 ft.³ |
| Sealed F3 | 81 Hz |
| Vented Volume | 0.89 ft.³ |
| Vented F3 | 46 Hz |
| Article number | DA215-8 |
| EAN | 0844632087691 |
| Woofer Series | Dayton Audio Specialty Drivers Series |
|---|---|
| Woofer Type | Midwoofer |
| Nominal Diameter | 8″ |
| Power Handling (RMS) | 60 Watts |
| Power Handling (max) | 120 Watts |
| Impedance (Z) | 8 Ω |
| Sensitivity (SPL at 1m / 2.83V) | 88.7 dB |
| Frequency response | 35 – 8.000 Hz |
| Voice Coil Diameter | 36 mm |
| Magnet Weight | 30 oz. |
| DC Resistance (Re) | 6.8 Ω |
| Voice Coil Inductance (Le) | 1.44 mH |
| Resonant Frequency (Fs) | 35 Hz |
| Mechanical Q (Qms) | 1.95 |
| Electromagnetic Q (Qes) | 0.45 |
| Total Q (Qts) | 0.37 |
| Diaphragm Mass Inc. Airload (Mms) | 30.3g |
| Mechanical Compliance of Suspension (Cms) | 0.68 mm/N |
| Surface Area of Cone (Sd) | 211.2 cm² |
| Volume of Displacement (Vd) | 112.0 cm³ |
| BL Product (BL) | 10.00 Tm |
| Compliance Equivalent Volume (Vas) | 42.7 liters |
| Maximum Linear Excursion (Xmax) | 5.3 mm |
| Cone / Diaphragm Material | Aluminum Cone |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 216 mm |
| Overall Depth | 94.5 mm |
| Baffle Cutout Diameter | 180 mm |
| # Mounting Holes | 5 |
| Sealed Volume | 0.32 ft.³ |
| Sealed F3 | 81 Hz |
| Vented Volume | 0.89 ft.³ |
| Vented F3 | 46 Hz |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
