View all
View all
Dayton Audio DS175-8 6-1/2″ Designer Series Woofer Speaker
Although it’s true that the Dayton Audio Designer Series DS175-8 is a nice looking and well thought-out 6-1/2″ woofer, its ability to handle full rated power down to 40 Hz* without exceeding Xmax is very impressive!
- Impedance (Z)
- 8 ohms
- Power Handling (RMS)
- 70 Watts
- Power Handling (max)
- 140 Watts
€54.95
9 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Cosmetic frame with low profile lip, designed for front mounting—no countersinking required!
- Coated paper cone, half roll rubber surround for durability and accurate reproduction
- Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet
- Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers
- Vented pole piece for minimized power compression and maximized reliability
- Generous Xmax capability encourages use of moderate bass boost to tailor the response
- Retains the same “family look” as the popular Dayton Audio DVC Series subwoofers and passive radiators
Product details
Dayton Audio DS175-8 6-1/2″ Designer Series Woofer Speaker
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
Specifications
| Article number | DS175-8 |
| EAN | 0844632095405 |
| Woofer Series | Dayton Audio Designer series |
| Woofer Type | Midwoofer |
| Nominal Diameter | 6.50" |
| Power Handling (RMS) | 70 Watts |
| Power Handling (max) | 140 watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 87.7 dB |
| Frequency Response | 40 – 4,500 Hz |
| Voice Coil Diameter | 35.5 mm |
| Magnet Weight | 33 oz. |
| DC Resistance (Re) | 5.7 ohms |
| Voice Coil Inductance (Le) | 1.06 mH @ 1 kHz |
| Resonant Frequency (Fs) | 37 Hz |
| Mechanical Q (Qms) | 1.63 |
| Electromagnetic Q (Qes) | 0.32 |
| Total Q (Qts) | 0.27 |
| Diaphragm Mass Inc. Airload (Mms) | 26g |
| Mechanical Compliance of Suspension (Cms) | 0.71 mm/N |
| Surface Area of Cone (Sd) | 128.7 cm² |
| Volume of Displacement (Vd) | 67.6 cm³ |
| BL Product (BL) | 10.4 Tm |
| Compliance Equivalent Volume (Vas) | 17 liters |
| Maximum Linear Excursion (Xmax) | 5.25 mm |
| Cone / Diaphragm Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 175.6 mm |
| Overall Depth | 80.6 mm |
| Baffle Cutout Diameter | 144 mm |
| # Mounting Holes | 5 |
| Sealed Volume | 0.1 ft.³ |
| Sealed F3 | 106 Hz |
| Vented Volume | 0.2 ft.³ |
| Vented F3 | 67 Hz |
| Article number | DS175-8 |
| EAN | 0844632095405 |
| Woofer Series | Dayton Audio Designer series |
|---|---|
| Woofer Type | Midwoofer |
| Nominal Diameter | 6.50″ |
| Power Handling (RMS) | 70 Watts |
| Power Handling (max) | 140 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 87.7 dB |
| Frequency response | 40 – 4,500 Hz |
| Voice Coil Diameter | 35.5 mm |
| Magnet Weight | 33 oz. |
| DC Resistance (Re) | 5.7 ohms |
| Voice Coil Inductance (Le) | 1.06 mH @ 1 kHz |
| Resonant Frequency (Fs) | 37 Hz |
| Mechanical Q (Qms) | 1.63 |
| Electromagnetic Q (Qes) | 0.32 |
| Total Q (Qts) | 0.27 |
| Diaphragm Mass Inc. Airload (Mms) | 26g |
| Mechanical Compliance of Suspension (Cms) | 0.71 mm/N |
| Surface Area of Cone (Sd) | 128.7 cm² |
| Volume of Displacement (Vd) | 67.6 cm³ |
| BL Product (BL) | 10.4 Tm |
| Compliance Equivalent Volume (Vas) | 17 liters |
| Maximum Linear Excursion (Xmax) | 5.25 mm |
| Cone / Diaphragm Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 175.6 mm |
| Overall Depth | 80.6 mm |
| Baffle Cutout Diameter | 144 mm |
| # Mounting Holes | 5 |
| Sealed Volume | 0.1 ft.³ |
| Sealed F3 | 106 Hz |
| Vented Volume | 0.2 ft.³ |
| Vented F3 | 67 Hz |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
