View all
View all
Sure Electronics AA-AB32155 2x15W 4 Ohm TA2024 Class-D Audio Amplifier Board
This assembled and tested Class-T amplifier board features proprietary digital power processing technology, perfect for creating active speakers for home or multimedia applications.
- Input impedance
- 22k ohms
- Rated power output
- 2 x 15 watts at 4 ohms
- Power Requirements
- 10 - 14 VDC
€24.95
6 in stock
Delivery options and total cost confirmed at checkout.
Ask us to check connections, dimensions and compatibility before you order.
Get compatibility adviceHighlights
- Tripath TA2024 Class-D/Class-T architecture
- Proprietary digital power processing technology
- Audiophile performance
- Two channels, 4 or 8 ohm loads
- No heat sink required
- Up to 88% efficiency
- Line level analog audio input
Product details
Sure Electronics AA-AB32155 2x15W 4 Ohm TA2024 Class-D Audio Amplifier Board
Assembled and tested, this Class-T amplifier is designed with proprietary digital power processing technology, perfect for creating active speakers for home or multimedia applications. Features include: mute and sleep inputs, turn-on/turn-off pop suppression, intelligent short-circuit protection, and over-temperature protection. Requires single 12 VDC power source. Recommended power supply: 12VDC, 2000 mA, regulated. Board only, mounting hardware not included.
Specifications
| Article number | AA-AB32155 |
| EAN | 0844632098253 |
| Rated power output | 2 x 15 watts at 4 ohms |
| Minimum load | 4 ohms |
| Efficiency | 80 – 85 % |
| Signal-to-noise ratio (SNR) | 84.4 dB |
| Distortion | <p>0.024 % THD at 1 kHz, 4 ohms, 1 watt</br>0.54 % THD at 1 kHz, 4 ohms, 10 watts</p> |
| Frequency response | 20 – 20,000 Hz |
| Gain | 21 dB |
| Input sensitivity | 0.75 V |
| Input impedance | 22k ohms |
| Amplifier Classification | Class D |
| Circuit Topology | Tripath TA2024 |
| Speaker output channels | 2 |
| Input connection type | <p>RCA</br> PCB solder connection</p> |
| Speaker output connection type | <p>Screw terminal</br> PCB solder connection</p> |
| DSP function | – |
| Bluetooth | – |
| Power Requirements | 10 – 14 VDC |
| Power inlet connector | 2.5 mm DC jack<br>Screw terminal |
| Current limit | 3 A |
| Under/over voltage protection | – |
| Dimensions (L x W x H) | 91 x 69 x 17 mm |
| Mounting hole spacing | 84 x 61 mm |
| Mounting hole diameter | 3.5 mm |
| Article number | AA-AB32155 |
| EAN | 0844632098253 |
| Rated power output | 2 x 15 watts at 4 ohms |
|---|---|
| Minimum load | 4 Ohms |
| Efficiency | 80 – 85 % |
| Signal-to-noise ratio (SNR) | 84.4 dB |
| Distortion | 0.024 % THD at 1 kHz, 4 ohms, 1 watt0.54 % THD at 1 kHz, 4 ohms, 10 watts |
| Frequency response | 20 – 20,000 Hz |
| Gain | 21 dB |
| Input sensitivity | 0.75 V |
| Input impedance | 22k ohms |
| Amplifier classification | Class-D |
| Circuit Topology | Tripath TA2024 |
| Speaker output channels | 2 |
| Input connection type | RCA PCB solder connection |
| Speaker output connection type | Screw terminal PCB solder connection |
| Power Requirements | 10 – 14 VDC |
| Power inlet connector | 2.5 mm DC jackScrew terminal |
| Current limit | 3 A |
| Dimensions (L x W x H) | 91 x 69 x 17 mm |
| Mounting hole spacing | 84 x 61 mm |
| Mounting Hole Diameter | 3.5 mm |
Alternatives
Compare other options from the same product category.
Recommended additions
Explore more for your audio setup. Check connections, dimensions and compatibility before ordering.
