View all
View all
Tectonic Elements TEBM35C10-4 BMR 2″ BMR Full-Range Speaker 4 Ohm
€21.45
The TEBM35C10-4 BMR 2″ full-range is an audio drive unit with an extended frequency response and extremely wide directivity. It combines the benefits of Tectonic Elements bending-wave technology and pistonic modes of operation.
Available on backorder
Highlights
- Blends pistonic and resonant mode output for wide frequency response
- The small form-factor is ideally suited for compact audio enabled products
- Nearly 180° dispersion all the way up to 20,000 Hz
- Only 2″ diameter and 1″ deep allows mounting almost anywhere
Product details
Tectonic Elements TEBM35C10-4 BMR 2″ Full-Range Speaker 4 Ohm
By combining the benefits of bending-wave technology and pistonic modes of operation, Tectonic Element’s TEBM35C10-4 BMR 2″ full-range delivers extended frequency response and extremely wide directivity. The small form-factor is ideally suited for compact products that require a full-range drive unit, room filling sound and a high performance acoustic solution. The small size, extended response, and low cost also make the TEBM35C10-4 an excellent choice for use in higher output line array designs. This unique driver can be used for anything from small handheld speakers, toys and displays to larger TV speaker bars, Wi-Fi speaker systems, and even compact sound reinforcement systems.
Specifications
| Article number | TEBM35C10-4 |
| EAN | 0848864043845 |
| Nominal Diameter | 2" |
| Power Handling (RMS) | 10 Watts |
| Power Handling (max) | 20 Watts |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 83 dB |
| Frequency Response | 100 to 20,000 Hz |
| Voice Coil Diameter | 0.80" |
| DC Resistance (Re) | 4.2 ohms |
| Voice Coil Inductance (Le) | 0.05 mH |
| Resonant Frequency (Fs) | 145 Hz |
| Mechanical Q (Qms) | 3.84 |
| Electromagnetic Q (Qes) | 1.06 |
| Total Q (Qts) | 0.83 |
| Diaphragm Mass Inc. Airload (Mms) | 1.11g |
| Mechanical Compliance of Suspension (Cms) | 1.085 mm/N |
| Surface Area of Cone (Sd) | 11.04 cm² |
| BL Product (BL) | 2.0 Tm |
| Compliance Equivalent Volume (Vas) | 0.0063 ft.³ |
| Maximum Linear Excursion (Xmax) | 2.5 mm |
| Surround Material | Rubber |
| Basket / Frame Material | Polymer |
| Magnet Material | Neodymium |
| Overall Outside Diameter | 2.04" |
| Overall Depth | 0.98" |
| Baffle Cutout Diameter | 1.69" |
| Bolt Circle Diameter | 1.9" |
| # Mounting Holes | 4 |
| Sealed Volume | 0.016 ft.³ |
| Sealed F3 | 154 Hz |
| Vented Volume | 0.026 ft.³ |
| Vented F3 | 85 Hz |
| Article number | TEBM35C10-4 |
| EAN | 0848864043845 |
| Nominal Diameter | 2″ |
|---|---|
| Power Handling (RMS) | 10 Watts |
| Power Handling (max) | 20 Watts |
| Impedance (Z) | 4 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 83 dB |
| Frequency response | 100 to 20,000 Hz |
| Voice Coil Diameter | 0.80″ |
| DC Resistance (Re) | 4.2 ohms |
| Voice Coil Inductance (Le) | 0.05 mH |
| Resonant Frequency (Fs) | 145 Hz |
| Mechanical Q (Qms) | 3.84 |
| Electromagnetic Q (Qes) | 1.06 |
| Total Q (Qts) | 0.83 |
| Diaphragm Mass Inc. Airload (Mms) | 1.11g |
| Mechanical Compliance of Suspension (Cms) | 1.085 mm/N |
| Surface Area of Cone (Sd) | 11.04 cm² |
| BL Product (BL) | 2.0 Tm |
| Compliance Equivalent Volume (Vas) | 0.0063 ft.³ |
| Maximum Linear Excursion (Xmax) | 2.5 mm |
| Surround Material | Rubber |
| Basket / Frame Material | Polymer |
| Magnet Material | Neodymium |
| Overall Outside Diameter | 2.04″ |
| Overall Depth | 0.98″ |
| Baffle Cutout Diameter | 1.69″ |
| Bolt Circle Diameter | 1.9″ |
| # Mounting Holes | 4 |
| Sealed Volume | 0.016 ft.³ |
| Sealed F3 | 154 Hz |
| Vented Volume | 0.026 ft.³ |
| Vented F3 | 85 Hz |
