View all
View all
SB Acoustics Satori MW19TX-8 TeXtreme Midwoofer
€339.95
SB Acoustics Satori MW19TX-8 7.5″ TeXtreme Midwoofer
4 in stock
Description
Highlights
- Advanced TeXtreme® cone
- Vented aerodynamic cast aluminium chassis
- Soft low damping rubber surround
- Advanced BIMAX spider
Product Details
Powerful optimized low distortion neodymium motor system. Extended copper sleeve on pole piece. Non-conducting fibreglass voice coil former. Vented pole piece and voice coil. Lightweight CCAW voice coil. Long-life silver lead wires.
Specifications
| Article number | MW19TX-8 |
| EAN | 8785256843640 |
| Woofer Series | SB Acoustics Satori series |
| Woofer Type | Midwoofer |
| Nominal Diameter | 7.5" |
| Power Handling (RMS) | 70 Watts |
| Power Handling (max) | 70 W |
| Impedance (Z) | 8 Ohms |
| Sensitivity (SPL at 1m / 2.83V) | 93 dB |
| Magnet Weight | 0.15 kg |
| DC Resistance (Re) | 6.0 ohms |
| Voice Coil Inductance (Le) | 0.20 mH |
| Resonant Frequency (Fs) | 33 Hz |
| Mechanical Q (Qms) | 6.47 |
| Electromagnetic Q (Qes) | 0.35 |
| Total Q (Qts) | 0.33 |
| Diaphragm Mass Inc. Airload (Mms) | 15.6 g |
| Mechanical Compliance of Suspension (Cms) | 1.52 mm/N |
| Surface Area of Cone (Sd) | 158 cm2 |
| BL Product (BL) | 7.5 Tm |
| Compliance Equivalent Volume (Vas) | 53.4 liters |
| Maximum Linear Excursion (Xmax) | 6.7 mm |
| Driver's Mechanical Losses (Rms) | 0.5 kg/s |
| Article number | MW19TX-8 |
| EAN | 8785256843640 |
Additional information
| Woofer Series | SB Acoustics Satori series |
|---|---|
| Woofer Type | Midwoofer |
| Nominal Diameter | 7.5″ |
| Power Handling (RMS) | 70 Watts |
| Power Handling (max) | 70 W |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 93 dB |
| Magnet Weight | 0.15 kg |
| DC Resistance (Re) | 6.0 ohms |
| Voice Coil Inductance (Le) | 0.20 mH |
| Resonant Frequency (Fs) | 33 Hz |
| Mechanical Q (Qms) | 6.47 |
| Electromagnetic Q (Qes) | 0.35 |
| Total Q (Qts) | 0.33 |
| Diaphragm Mass Inc. Airload (Mms) | 15.6 g |
| Mechanical Compliance of Suspension (Cms) | 1.52 mm/N |
| Surface Area of Cone (Sd) | 158 cm2 |
| BL Product (BL) | 7.5 Tm |
| Compliance Equivalent Volume (Vas) | 53.4 liters |
| Maximum Linear Excursion (Xmax) | 6.7 mm |
| Driver's Mechanical Losses (Rms) | 0.5 kg/s |
Shipping & Delivery
USPS Fast Shipping
