View all
View all
Dayton Audio CE38M-8 1-1/2″ Mini Speaker
€6.95
Dayton Audio’s CE38M-8 is a lightweight and versatile mylar-diaphragm mini speaker with a rugged plastic frame and neodymium magnet. It’s a great choice for new design or replacement use in headphones, kiosks, electronic games, or portable electronics.
Available on backorder
Highlights
- Lightweight mylar diaphragm
- Rugged molded plastic frame
- Powerful neodymium magnet
- Light weight, low cost
Product details
Dayton Audio CE Series CE38M-8 1-1/2″ Mini Speaker 8 Ohm
The Commercial Engineering (CE) Series drivers from Dayton Audio provides engineers, designers, and integrators with a line of economical small drivers that fit the diverse range of applications found in consumer electronics and audio-enabled electronic projects.
The Dayton Audio CE38M-8 1-1/2” mini speaker features a feather-light and smooth-sounding Mylar diaphragm and a lightweight injection-molded plastic frame, making it great for portable electronics and headphones. The high sensitivity also enables it to be used as a speaker in kiosks, intercoms, displays, or electronic games, and the 8-ohm impedance works with most small audio amplifiers or line-level outputs. The round frame can be press-fit or glued in place.
Note: The Mylar diaphragm is very fragile. To prevent damage, avoid contact with the diaphragm when handling. This driver should be installed behind a grille.
Specifications
| Article number | CE38M-8 |
| EAN | 0848791001093 |
| Woofer Series | Dayton Audio CE series |
| Woofer Type | Full-range |
| Nominal Diameter | 1-1/2" |
| Power Handling (RMS) | 0.25 Watts |
| Power Handling (max) | 0.50 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 75 dB |
| Frequency Response | 190 to 20,000 Hz |
| Voice Coil Diameter | 0.5" |
| DC Resistance (Re) | 7.72 ohms |
| Voice Coil Inductance (Le) | 0.172 mH |
| Resonant Frequency (Fs) | 192 Hz |
| Mechanical Q (Qms) | 1.591 |
| Electromagnetic Q (Qes) | 4.453 |
| Total Q (Qts) | 1.17 |
| Diaphragm Mass Inc. Airload (Mms) | 0.07g |
| Mechanical Compliance of Suspension (Cms) | 9.68 mm/N |
| Surface Area of Cone (Sd) | 4.9 cm² |
| BL Product (BL) | 0.39 Tm |
| Maximum Linear Excursion (Xmax) | 0.1 mm |
| Cone / Diaphragm Material | Poly / Mylar Diaphragm |
| Magnet Material | Neodymium |
| Overall Outside Diameter | 1.65" |
| Overall Depth | 0.3" |
| Baffle Cutout Diameter | 1.45" |
| Article number | CE38M-8 |
| EAN | 0848791001093 |
| Woofer Series | Dayton Audio CE series |
|---|---|
| Woofer Type | Full-Range |
| Nominal Diameter | 1-1/2″ |
| Power Handling (RMS) | 0.25 Watts |
| Power Handling (max) | 0.50 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 75 dB |
| Frequency response | 190 to 20,000 Hz |
| Voice Coil Diameter | 0.5″ |
| DC Resistance (Re) | 7.72 ohms |
| Voice Coil Inductance (Le) | 0.172 mH |
| Resonant Frequency (Fs) | 192 Hz |
| Mechanical Q (Qms) | 1.591 |
| Electromagnetic Q (Qes) | 4.453 |
| Total Q (Qts) | 1.17 |
| Diaphragm Mass Inc. Airload (Mms) | 0.07g |
| Mechanical Compliance of Suspension (Cms) | 9.68 mm/N |
| Surface Area of Cone (Sd) | 4.9 cm² |
| BL Product (BL) | 0.39 Tm |
| Maximum Linear Excursion (Xmax) | 0.1 mm |
| Cone / Diaphragm Material | Poly / Mylar Diaphragm |
| Magnet Material | Neodymium |
| Overall Outside Diameter | 1.65″ |
| Overall Depth | 0.3″ |
| Baffle Cutout Diameter | 1.45″ |
