View all
View all
Tang Band W4-2142 4″ Paper Cone Full Range Driver 8 Ohm
€74.95
With a bamboo fiber paper cone, structured Santoprene surround, and underhung motor, the W4-2142 4″ full range from Tang Band has impressive response from 60 to 20,000 with very low distortion.
Available on backorder
Highlights
- Underhung voice coil improves control for lower distortion
- Aluminum phase plug also acts as a shorting ring for lower distortion
- Impressive efficiency (88 dB 1W/1m) for a driver this small
- Unique surround and large spider keeps cone linear well beyond the rated xmax
Product details
Tang Band W4-2142 4″ Paper Cone Full Range Driver 8 Ohm
Tang Band’s versatile W4-2142 full range driver uses an underhung voice coil, which places the entire coil inside the magnetic gap, for the utmost in control and accuracy. Designed for minimum distortion and resonance, the bamboo fiber paper cone and structured surround produces smooth response without harsh peaks or dips. The aluminum phase plug improves off axis response while also acting as a shorting ring providing greater control of the voice coil resulting in lower distortion.
Specifications
| Article number | W4-2142 |
| EAN | 0848864023786 |
| Woofer Type | Full-range |
| Nominal Diameter | 4" |
| Power Handling (RMS) | 25 Watts |
| Power Handling (max) | 50 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 88 dB |
| Frequency Response | 60 to 20,000 Hz |
| Voice Coil Diameter | 1" |
| DC Resistance (Re) | 6.3 ohms |
| Voice Coil Inductance (Le) | 0.022 mH |
| Resonant Frequency (Fs) | 60 Hz |
| Mechanical Q (Qms) | 2.2 |
| Electromagnetic Q (Qes) | 0.39 |
| Total Q (Qts) | 0.33 |
| Diaphragm Mass Inc. Airload (Mms) | 4.61g |
| Mechanical Compliance of Suspension (Cms) | 1.52 mm/N |
| Surface Area of Cone (Sd) | 54.3 cm² |
| BL Product (BL) | 5.41 Tm |
| Compliance Equivalent Volume (Vas) | 0.22 ft.³ |
| Maximum Linear Excursion (Xmax) | 2.4 mm |
| Cone / Diaphragm Material | Bamboo Fiber / Paper |
| Surround Material | Santoprene® |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Kapton® / Polyimide |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 4.92" |
| Overall Depth | 3.18" |
| Baffle Cutout Diameter | 3.74" |
| Bolt Circle Diameter | 4.5" |
| # Mounting Holes | 4 |
| Sealed Volume | 0.063 ft.³ |
| Sealed F3 | 150 Hz |
| Vented Volume | 0.10 ft.³ |
| Vented F3 | 88 Hz |
| Article number | W4-2142 |
| EAN | 0848864023786 |
| Woofer Type | Full-Range |
|---|---|
| Nominal Diameter | 4″ |
| Power Handling (RMS) | 25 Watts |
| Power Handling (max) | 50 Watts |
| Impedance (Z) | 8 ohms |
| Sensitivity (SPL at 1m / 2.83V) | 88 dB |
| Frequency response | 60 to 20,000 Hz |
| Voice Coil Diameter | 1″ |
| DC Resistance (Re) | 6.3 ohms |
| Voice Coil Inductance (Le) | 0.022 mH |
| Resonant Frequency (Fs) | 60 Hz |
| Mechanical Q (Qms) | 2.2 |
| Electromagnetic Q (Qes) | 0.39 |
| Total Q (Qts) | 0.33 |
| Diaphragm Mass Inc. Airload (Mms) | 4.61g |
| Mechanical Compliance of Suspension (Cms) | 1.52 mm/N |
| Surface Area of Cone (Sd) | 54.3 cm² |
| BL Product (BL) | 5.41 Tm |
| Compliance Equivalent Volume (Vas) | 0.22 ft.³ |
| Maximum Linear Excursion (Xmax) | 2.4 mm |
| Cone / Diaphragm Material | Bamboo Fiber / Paper |
| Surround Material | Santoprene® |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Kapton® / Polyimide |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 4.92″ |
| Overall Depth | 3.18″ |
| Baffle Cutout Diameter | 3.74″ |
| Bolt Circle Diameter | 4.5″ |
| # Mounting Holes | 4 |
| Sealed Volume | 0.063 ft.³ |
| Sealed F3 | 150 Hz |
| Vented Volume | 0.10 ft.³ |
| Vented F3 | 88 Hz |
