View all
View all
Dayton Audio DS90-PR 3″ Designer Series Passive Radiator
€23.40
The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. Built to be a perfect match for the Designer Series drivers, these passive radiators feature the same steel frame, rubber surround, and treated paper cone making them visually identical.
2 in stock
Highlights
- Perfect match for Dayton Audio’s paper cone Designer Series drivers
- Allows tuning small enclosures lower than using conventional ports
- Rear mounted screw allows easy mass adjustment for custom tuning
- Cosmetic frame edge looks great even when surface mounted
Product details
Dayton Audio DS90-PR 3″ Designer Series Passive Radiator
The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, these passives match Dayton Audio’s Designer Series drives, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to portable battery powered speaker systems.
Specifications: • Fs: 42.4 Hz • Vas: 0.124 cu. ft. • Qms: 5.9 • Cms: 2.55 mm/N • Rms: 0.3 kg/s • Mms: 5.5 g • Sd: 31.2 sq. cm. • Xmax: 4 mm • Dimensions: Overall diameter: 3.63″, Cutout diameter: 2.76″, Depth: 0.86″.
Note: Adding mass to the passive radiator will decrease Fs and increase Qms.
Tip: As a general rule, the passive radiator(s) should have at least double the displacement of air (Vd) as the active woofer(s)/subwoofer(s) in the system.
To calculate Vd: Sd x Xmax = Vd
Specifications
| Article number | DS90-PR |
| EAN | 0848791004995 |
| Woofer Series | Dayton Audio Designer series |
| Woofer Type | Passive Radiator |
| Nominal Diameter | 3’’ |
| Resonant Frequency (Fs) | 42 Hz |
| Mechanical Q (Qms) | 5.9 |
| Diaphragm Mass Inc. Airload (Mms) | 5.5g |
| Mechanical Compliance of Suspension (Cms) | 2.55 mm/N |
| Surface Area of Cone (Sd) | 31.2 cm² |
| Volume of Displacement (Vd) | 12.5 cm³ |
| Compliance Equivalent Volume (Vas) | 0.124 ft.³ |
| Maximum Linear Excursion (Xmax) | 4 mm |
| Cone / Diaphragm Material | Paper |
| Surround Material | Rubber |
| Basket / Frame Material | Steel |
| Overall Outside Diameter | 3.63" |
| Overall Depth | 0.86" |
| Baffle Cutout Diameter | 2.76" |
| # Mounting Holes | 4 |
| Note | Adding mass to the passive radiator will decrease Fs and increase Qms. |
| Tip | As a general rule, the passive radiator(s) should have at least double the displacement of air (Vd) as the active woofer(s)/subwoofer(s) in the system. To calculate Vd: Sd x Xmax = Vd |
| Fs | 42.4 Hz |
| Vas | 0.124 cu. ft. |
| Qms | 5.9 |
| Cms | 2.55 mm/N |
| Rms | 0.3 kg/s |
| Mms | 5.5 g |
| Sd | 31.2 sq. cm. |
| Xmax | 4 mm |
| Dimensions | Overall diameter: 3.63", Cutout diameter: 2.76", Depth: 0.86". |
| Article number | DS90-PR |
| EAN | 0848791004995 |
| Woofer Series | Dayton Audio Designer series |
|---|---|
| Woofer Type | Passive Radiator |
| Nominal Diameter | 3’’ |
| Resonant Frequency (Fs) | 42 Hz |
| Mechanical Q (Qms) | 5.9 |
| Diaphragm Mass Inc. Airload (Mms) | 5.5g |
| Mechanical Compliance of Suspension (Cms) | 2.55 mm/N |
| Surface Area of Cone (Sd) | 31.2 cm² |
| Volume of Displacement (Vd) | 12.5 cm³ |
| Compliance Equivalent Volume (Vas) | 0.124 ft.³ |
| Maximum Linear Excursion (Xmax) | 4 mm |
| Cone / Diaphragm Material | Paper |
| Surround Material | Rubber |
| Basket / Frame Material | Steel |
| Overall Outside Diameter | 3.63″ |
| Overall Depth | 0.86″ |
| Baffle Cutout Diameter | 2.76″ |
| # Mounting Holes | 4 |
| Note | Adding mass to the passive radiator will decrease Fs and increase Qms. |
| Tip | As a general rule, the passive radiator(s) should have at least double the displacement of air (Vd) as the active woofer(s)/subwoofer(s) in the system. To calculate Vd: Sd x Xmax = Vd |
| Fs | 42.4 Hz |
| Vas | 0.124 cu. ft. |
| Qms | 5.9 |
| Cms | 2.55 mm/N |
| Rms | 0.3 kg/s |
| Mms | 5.5 g |
| Sd | 31.2 sq. cm. |
| Xmax | 4 mm |
| Dimensions | Overall diameter: 3.63″, Cutout diameter: 2.76″, Depth: 0.86″. |
